16  References

 

[1] CEGB:'Chemical control of boiler feedwater, boiler water and saturated steam for drum-type and once-through boilers': Generation operation memorandum (GOM)72 Issue 4: 1975

[2] Popplewell and Bates: 'Corrosion Performance of some Copper Alloy Condenser Tube Materials in Ammoniated Condensate': National Association of Corrosion Engineers, Paper 102, Corrosion: 1974

[3] 'Titanium Information Bulletin': Imperial Metal Industries (Kynoch) Ltd.: 1974

[4] Hanson, C. F.: 'Materials in Power Plant': Institute of Metallurgists, 98-103: April 1975

[5] 'Standards for Steam Surface Condensers': The Heat Exchanger Institute (HEI)

[6] 'Publication on the recommended practise for the design of surface-type steam condensing plant': The British Electrical and Allied Manufacturers Association (BEAMA)

[7] Steel, T. F. (CEGB): The Thermal Design of Condensers from the users point of view'; taken from a report of a meeting at NEL on the Thermal Design of Condensers: January 1966

[8] International Symposium on Condensers, Theory and Practice: UMIST Manchester: March 1983.

[9] BS4360: Specification for Weldable Structural Steels: 1972

[10] BS1501: Specification for steels for fired and unfired pressure vessels, Part 1 , Carbon and Carbon Manganese Steels: 1964

[11] BS1500 (Withdrawn), now BS5500: Specification for Unfired Fusion Welded Pressure Vessels: 1976

[12] BS1515 (withdrawn), now BS5500: Specification for Unfired Fusion Welded Pressure Vessels: 1976

[13] Tubular Exchanger Manufacturers Association (ТЕМА) Standards: Fourth Edition 1959, Fifth Edition 1968

[14] American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section 8, Divisions 1 and 2

[15] CEGB: Performance of Surface-type Steam Condensers: Site Test Code No. 3: 1981

[16] BS752: 'Test Code for Acceptance of Steam Turbines': 1974

[17] CEGB: 'Steam Turbine-Generator Heat Rate Tests': Site Test Code No. 2: 1978

[18] American Society of Mechanical Engineers (ASME): 'Structural Characteristics of Helical-Corrugated Heat Exchanger Tubes by ASME': 1975

[19] Stepanoff, A. J.: 'Centrifugal Pump Performance as Function of Specific Speed': Trans ASME: 1943

[20] Grist, E.: 'Nett positive suction head requirements for avoidance of unacceptable cavitation erosion in centrifugal pumps': IMechE C163: 1974

[21] BS5316: 'Specification for Acceptance Tests for Centrifugal, Mixed Flow and Axial Pumps'

[22] BS5257: 'Specification for End-suction Centrifugal Pumps (16 bar)': 1975

[23] BS4082: 'Specification for External Dimensions for Vertical In-Line Centrifugal Pumps'

 

<<- Previous entry                  Table of contents             Next entry ->>